15
Chapter 4: Setting up and Mounting the Wireless-G Internet Camera
Setup Wizard
Wireless-G PTZ Internet Camera with Audio
11. If you selected Automatic Configuration-DHCP, proceed to the next step.
If you selected Static IP Address, the
IP Settings
screen will appear. Enter an IP Address, Subnet Mask, and
Default Gateway appropriate for your network. You must specify an IP Address and Subnet Mask on this
screen. If you are unsure about the Default Gateway, it is better to leave this field blank. Then complete the
Primary DNS
and/or
Secondary DNS
fields. You must enter at least one DNS address, which can be obtained
from your ISP. Click
Next
to continue.
12. The
Mode Setting
screen will appear next. Click the
Infrastructure
radio button if you want the Camera to
communicate using an access point or wireless router. Click the
Ad-Hoc
radio button if you want the Camera
to communicate without using an access point or wireless router. After making your selection, click
Next
.
Figure 4-11: IP Settings Screen
Figure 4-12: Mode Settings Screen