manualshive.com logo in svg

Cisco Linksys WVC210, User Manual, Page: 10 / 83

Share
Download
Cisco Linksys WVC210 User Manual Download Page 10

6

Chapter 2: Getting to Know the PTZ Internet Camera
Camera LCD Screen and Built-in Microphone

Wireless-G PTZ Internet Camera with Audio

Chapter 2: Getting to Know the PTZ Internet Camera

Camera LCD Screen and Built-in Microphone

The Camera has a LCD screen that indicates the Camera’s current IP address and whether it is a fixed or dynamic 
address. If the Camera uses a fixed IP address, then the screen will display the word “FIXED.” If the Camera uses 
a dynamic IP address, then the screen will display the word “DHCP.” 

The built-in microphone is located approximately one inch below the LCD screen, in the middle of the Camera’s 
front panel. It has a range of approximately 9 feet (3 meters), depending on environmental conditions.

Camera LEDs

The Camera has four LEDs to let you know how the Camera is functioning.

POWER

Amber. The 

POWER 

LED lights up when the Camera is powered on. It flashes for about 10-15 

seconds while the Camera is initializing.

ACTIVITY

Green. The 

ACTIVITY

 LED flashes when there is activity.

LAN

Green. The 

LAN 

LED lights up when there is a connection to a wired network. It flashes when 

data is transmitted to or received from the wired network.

WLAN

Green. The 

WLAN

 LED lights up when there is a connection to a wireless network. It flashes 

when data is transmitted to or received from the wireless network.

Figure 2-1: Camera LEDS, LCD Screen and 

Built-in Microphone

Built-in 

Microphone

Summary of Contents for Linksys WVC210




















































































Reviews:

No comments