manualshive.com logo in svg

Cisco Linksys WVC210, User Manual, Page: 65 / 83

Share
Download
Cisco Linksys WVC210 User Manual Download Page 65

61

Appendix C: Upgrading Firmware

Wireless-G PTZ Internet Camera with Audio

Appendix C: Upgrading Firmware

The Camera's firmware is upgraded through the Web-based Utility's 

Maintenance

 tab. Follow these instructions:

1. Download the firmware from Linksys’s website at 

www.linksys.com

. Then extract the file.

2. Access the Camera’s Web-based Utility, and click the 

Maintenance

 tab.

3. On the 

Maintenance

 screen, click the 

Firmware Upgrade 

button.

4. Click the 

Browse

 button to find the extracted file, and then double-click the filename.

5. Click the 

Start Upgrade

 button, and follow the on-screen instructions. Click the 

Cancel

 button to cancel the 

firmware upgrade. For more information, click the 

Help

 button.

Figure C-1: Upgrade Firmware Screen

Note:

 Linksys recommends that you upgrade the Camera’s firmware within your network; in other 

words, use a computer within the Camera’s local network. If you attempt to upgrade the Camera’s 
firmware from a remote location—using a computer outside of the Camera’s local network—the 
upgrade will fail.

Summary of Contents for Linksys WVC210




















































































Reviews:

No comments