manualshive.com logo in svg

Cisco Linksys WVC210, User Manual, Page: 23 / 83

Share
Download
Cisco Linksys WVC210 User Manual Download Page 23

19

Chapter 5: Installing and Using the Internet Camera Viewer & Recorder Utility
Overview

Wireless-G PTZ Internet Camera with Audio

Chapter 5: Installing and Using the Internet Camera Viewer & 
Recorder Utility

Overview

This chapter will instruct you on how to install and use the Internet Camera Viewer & Recorder Utility on your PC. 
The Utility allows you to easily view and record the Camera’s video.

If another Internet Camera Viewer & Recorder Utility has already been installed on your PC, you should uninstall it 
before installing this Internet Camera Viewer & Recorder Utility.

Installing the Viewer & Recorder Utility

1. On the 

Welcome

 or 

Congratulations

 screen of the Setup Wizard, click the 

Install Viewer & Recorder Utility

 

button.

2. The 

Welcome

 screen will appear. Click the 

Next

 button to proceed.

Figure 5-1: Install Viewer & Recorder Utility Screen

Figure 5-2: Install Viewer & Recorder Utility - 

Welcome Screen

NOTE:

To view video using a web browser, you must use Internet Explorer version 5.5 or 

higher. The View Video feature will not work with other web browsers. If you do not use 
Internet Explorer v5.5, use the Viewer & Recorder Utility instead.

Summary of Contents for Linksys WVC210




















































































Reviews:

No comments