50
Appendix E: Starting over in Windows 95, 98, ME, 2000, or XP
Starting Over in Windows 2000 or XP
EtherFast 10/100 LAN Card
10. Scroll down to the Other Devices listing. Click the
plus sign
. Remove
PCI Ethernet Controller
or
PCI
Ethernet Adapter.
(If Other Devices is not listed, proceed to the next step.)
11. Click the
Close
button, shut down Windows, and restart your computer.
12. After your computer has restarted, refer to the chapters for Windows 95, Windows 98 or Windows ME for
setup instructions.
Starting Over in Windows 2000 or XP
1. Click the
Start
button, choose Settings, choose Control Panel, then double-click the
System icon
. The
System Properties window will open.
2. Choose the
Hardware
tab, as shown in Figure E-4.
3. Click the
Device Manager
button. The Device Manager window will open.
4. Click the
plus sign
beside Network Adapters. The LNE100TX Fast Ethernet Adapter listing should appear.
5. Right-click on
LNE100TX Fast Ethernet Adapter
, as shown in Figure E-5. The following menu box should
open.
Figure E-4: Hardware
Figure E-5: Device Manager
