manualshive.com logo in svg

Cisco Linksys LNE100TX, User Manual, Page: 38 / 85

Share
Download
Cisco Linksys LNE100TX User Manual Download Page 38

31

Chapter 6: Manual Installation and Setup
Windows NT

EtherFast 10/100 LAN Card

5. Highlight the 

Linksys LNE100TX(v5) Fast Ethernet Adapter entry

 in the window that appears, shown in 

Figure 6-45.  Click the 

OK

 button. 

6. When NT asks you for the media type, choose the 

AutoSense

 option, as shown in Figure 6-46. When 

finished, click the 

Continue

 button. Then, click the 

Close

 button.

7. If Windows NT asks you to supply your original Windows NT CD-ROM or setup disks, direct Windows NT to the 

proper location (most likely D:\i386, where D represents the letter of your CD-ROM drive), as shown in Figure 
6-47, and click 

Continue.

8. Remove any disks and click the 

Yes

 button to restart your PC. (See Figure 6-48.)

9. Once your PC has rebooted, double-click the 

Network Neighborhood 

icon on your desktop.  Make sure that 

you have access to the network. If you do, the Adapter has been properly installed.

The Windows NT Installation and Setup of the EtherFast® 

10/100 LAN Card is complete.

Figure 6-45: Select OEM Option

Figure 6-46: Auto Sense

Figure 6-47: Windows NT Setup

Figure 6-48: Restart your Computer

Summary of Contents for Linksys LNE100TX






















































































Reviews:

No comments