3-11
Cisco H.323 Signaling Interface User Guide
OL-4806-01 Rev. A14
Chapter 3 Provisioning the Cisco HSI
H.323 Stack Configuration
Nonprovisionable Data
The parameters in
Table 3-5
cannot be altered through MML commands.
MML Provisionable Data
H.323 System Parameters
The parameters in
Table 3-6
are required for H.323 stack initialization. To modify the parameters in
Table 3-6
, use the h323_sys
MML name variable for the
prov-add
,
prov-dlt,
and
prov-ed
commands.
Stop and restart the application for these changes to take effect.
Note
The asterisk (*) after a parameter name in the first column of
Table 3-6
denotes a mandatory RADVision
parameter that has an inbuilt default value if a value is not set in provisioning.
Q.931 Parameters
To modify the parameters listed in
Table 3-7
, use the q931 MML name variable for the
prov-add,
prov-dlt,
and
prov-ed
commands.
In the following example, the
prov-add
command sets the Q.931 parameter maxCalls to the value 2000.
Table 3-5
Nonprovisionable Data Parameters
H323_SYS
Description
system.manualstart
Present
system.pdlname
Absent
system.delimiter
#FF
ras.gatekeeper
Absent
ras.rasmulticastaddress
224.0.1.41.1718
h245.capabilities.manualoperation
Present
h245.masterslave.manualoperation
Present
q931.manualaccept
Present
q931.earlyH245
Present
q931.autoanswer
Present
q931.manualcallprocessing
Present
q931.h245tunneling
Present
Table 3-6
H.323 System Initialization Parameters
Parameter
Description
Type
Example
maxCalls*
Maximum number of concurrent calls allowed
INTEGER(0, 65535)
2500
maxChannels*
Maximum number of concurrent channels allowed
INTEGER(0, 65535)
2
