A-33
Cisco H.323 Signaling Interface User Guide
OL-4806-01 Rev. A14
Appendix A MML User Interface and Command Reference
set-dest-state
set-dest-state
The
set-dest-state
command changes the service state of an IP link or E-ISUP signaling path to IS (in
service) or OOS (out of service).
set-dest-state:ipLink1toVscA:IS|OOS
set-dest-state:ipLink2toVscA:IS|OOS
set-dest-state:ipLink1toVscB:IS|OOS
set-dest-state:ipLink2toVscB:IS|OOS
set-dest-state:EisupPath:IS|OOS
set-dest-state:ipLinkNms:IS|OOS
Syntax Description
Examples
In the following example, the command changes the service state of an IP link signaling path to IS:
gw mml>
set-dest-state:ipLink1toVscA:state=IS
H323 Signaling Interface Day Mon 1 hh:mm:ss YYYY
M SUCC
Initiating state change of ipLink1toVscA to IS
gw mml> set-dest-state:ipLink1toVscA:state=OOS
H323 Signaling Interface Day Mon 1 hh:mm:ss YYYY
M SUCC
Initiating state change of ipLink1toVscA to OOS
Related Commands
IS
In service.
OOS
Out of service.
Command
Description
rtrv-dest
Retrieves status information about the IP links and E-ISUP signaling
path to the PGW 2200.
