A-34
Cisco H.323 Signaling Interface User Guide
OL-4806-01 Rev. A14
Appendix A MML User Interface and Command Reference
set-gapping
set-gapping
The
set-gapping
command sets the type of calls to be gapped.
set-gapping: inc | otg | both : calltype=normal | all, percent=
number
Syntax Description
Usage Guidelines
If call gapping is set to 100 percent, all calls are gapped irrespective of the normal or all parameter
setting.
If the overload condition is active and call gapping is active, the higher of the two percentage values
determines whether new call attempts are accepted or rejected.
Examples
In the following example, the command sets all calls to be gapped and specifies that 50 percent of the
calls be rejected due to call gapping:
gw mml>
set-gapping:both:calltype=all,percent=50
H323 Signaling Interface Day Mon 1 hh:mm:ss YYYY
M SUCC
Successfully set gapping for target 'both', calltype 'all', and percentage 50
Related Commands
inc
Gaps calls from the H.323 network.
otg
Gaps calls from the PSTN over E-ISUP.
both
Gaps calls originating from either side.
normal
Gaps all calls except priority and emergency calls.
all
Gaps calls of all types.
number
Specifies the percentage of calls rejected due to call gapping.
Command
Description
rtrv-gapping
Retrieves information about overload-triggered call gapping.
