IMPORTANT
Changing the default password to a strong password is an
extremely important step in preventing security breaches.
If you have logged into the configurator interface using default
login credentials, you will see a notification banner at the
bottom of the screen (
Figure 43. Default credentials notification banner
Click the banner to change the view mode credentials. You will
be taken to the
VIEW MODE SETTINGS
section.
To gain editing privileges for the View Mode settings window requires the
correct administrator user name and password. To change the
administrator user name and password for the current user, do the
following steps:
1.
Click the
-view mode settings
link under
MANAGEMENT
SETTINGS
in the left-hand settings menu.
VIEW MODE
SETTINGS
• The
Viewmode Credentials
section will be shown
).
Figure 44. VIEW MODE SETTINGS dialog (Viewmode
Credentials section)
2.
Enter the new user name in the
View Mode Username:
field.
3.
The default password is
viewmode
. Enter the new password in
the
View Mode User Password:
field.
NOTE
The new password must be a minimum of eight
characters, and include at least one capital letter and
one number.
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 92 of 138
