Figure 39. Configurator GUI (L2TP Configuration dialog)
• The
L2TP Configuration
).
2.
To enable L2TP functionality for the unit, check the
L2TP
check-
box.
• The L2TP configuration settings window will be shown.
3.
When the L2TP configuration has been set, save the settings by
clicking the
Save
button. Alternatively, clear the settings by
clicking the
Reset
button.
IMPORTANT
A detailed description of L2TP configuration methods is
beyond the scope of this manual. For detailed instructions on
how to set the L2TP configuration, refer to the
Fluidmesh
Networks L2TPv3 Configuration Manual
.
6.7.9. VLAN settings
VLAN configuration
The
VLAN SETTINGS
window contains controls to connect the Cisco
FM1000 Gateway to one or more virtual local area networks (VLANs) that
are part of the local wireless network.
IMPORTANT
The VLAN feature must be enabled using a software plug-in
(Fluidmesh part number
FM-VLAN
). Contact your Fluidmesh
Networks representative for details.
The Cisco FM1000 Gateway features smart self-management of
integration with connected VLANs, with minimal configuration time and
avoidance of potential configuration errors. This is done by A) relying on
the data-processing configuration of a connected network switch, and B)
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 85 of 138
