Cisco EA-Series, User Manual, Page: 118 / 531

3
Product Overview
Linksys EA-Series
EA6500
Top view
Indicator light
•
Indicator light
—Stays on steadily while power is connected and
following a successful Wi-Fi Protected Setup connection Pulses slowly
during bootup, during firmware upgrades, and during a Wi-Fi Protected
Setup connection Flashes quickly when there is a Wi-Fi Protected Setup
error
Back view
Ethernet ports
Wi-Fi Protected Setup button Internet port
Power port
Reset button
USB ports
•
Wi-Fi Protected Setup™ button —Press this button to easily configure
wireless security on Wi-Fi Protected Setup-enabled network devices
•
Ethernet ports
—Connect Ethernet cables (also called network cables)
to these Gigabit (10/100/1000) ports, color coded blue, and to wired
Ethernet network devices on your network
nOTE
For best performance, use CAT5E or higher rated cables on the
Ethernet ports
•
Internet port —Connect an Ethernet cable (also called a network or
Internet cable) to this port, color coded yellow, and to your modem
•
USB ports
—To easily share disk storage with other users on your network
or on the Internet, connect a USB drive to one of these ports You can also
connect a USB printer and share it across your network
•
Reset button —Press and hold this button for 5-15 seconds (until the
port lights flash at the same time) to reset the router to its factory
defaults You can also restore the defaults using Cisco Connect Cloud
•
Power port
—Connect the included AC power adapter to this port
•
Power button
—Press
|
(on) to turn on the router