Cisco EA-Series, User Manual, Page: 116 / 531

1
Product Overview
Linksys EA-Series
1
EA2700/EA3500
Back view
Ethernet ports Wi-Fi Protected Setup button
Internet port
Power port
Power indicator USB port (EA3500 only)
Your router’s appearance may vary
•
USB port (EA3500 only)
—To easily share disk storage with other users
on your network or on the Internet, connect a USB drive to this port
•
Ethernet ports —Connect Ethernet cables (also called network cables)
to these Gigabit (10/100/1000) ports, color coded blue, and to other
wired Ethernet network devices on your network
•
Internet port
—Connect an Ethernet cable (also called a network or
Internet cable) to this port, color coded yellow, and to your modem
•
Wi-Fi Protected Setup™ button
—Press this button to easily configure
wireless security on Wi-Fi Protected Setup-enabled network devices
•
Power indicator —Stays on steadily while power is connected and
following a successful Wi-Fi Protected Setup connection Flashes slowly
during bootup, during firmware upgrades, and during a Wi-Fi Protected
Setup connection Flashes quickly when there is a Wi-Fi Protected Setup
error
•
Power port
—Connect the included AC power adapter to this port
CAUTIOn
Use only the adapter that came with your router
•
Power button
—Press
|
(on) to turn on the router
Bottom view
Your router’s appearance may vary
•
Reset button
—Press and hold this button for 5-15 seconds (until the
port lights flash at the same time) to reset the router to its factory
defaults You can also restore the defaults using Cisco Connect Cloud
Product Overview