Configure Basic Settings
4042831 Rev A
29
Field Name
Description
Time Server
Add and delete time server URLs or IP addresses to and from the
list, as required. When using Network Time Protocol, multiple
time servers can be specified for the gateway to query for time of
day. The gateway will sequentially step through the listed time
servers until it acquires the current time. There are three well
known public time servers entered as default servers.
Function Keys
Key
Description
Apply
Saves all additions, edits, and changes.
Add Server
Allows you to add a network time server.
Remove Server
Allows you to remove a network time server.
Under normal conditions, you should use the default network settings. In the event
that the network time does not match your local time, or, if your system requires
different settings to operate correctly, you can change the default network settings
using the Setup Basic Settings - Network Configuration page.
Configuring the Network Settings
Note:
If you are not familiar with the network configuration procedures detailed in
the following sections, contact your service provider before you attempt to change
any of the residential gateway default network configuration settings.
Click
Network Configuration
in the Basic Settings section of the Setup page to
access the Setup Basic Settings - Network Configuration page.
