Cisco DPC2320 DOCSIS User Manual Download Page 72

Page: 72 / 130

Chapter 3 Configuring the DOCSIS Residential Gateway

4042831 Rev A

Setup Advanced Settings - VPN Setup Page Description

This section describes the section headings and field descriptions of the Setup
Advanced Settings - VPN Setup page. This page allows you to create, configure, and
control IPsec VPN tunnels.

Tunnel Section

Field Name

Description

Tunnel

Displays existing tunnels and allows each tunnel to be individually
configured.

Name

Displays the name of a group of settings for a single tunnel. If no name
is entered, the tunnels are named sequentially 1, 2, 3, and so on.

Enable/Disable

Enables/disables a VPN tunnel after the tunnel is named and
configured. Click

Apply

to activate the selected setting (Enabled or

Disabled).

Function Keys

The following table describes the function keys associated with the Tunnel section of
the VPN Setup page.

Key

Description

Delete Tunnel

Allows you to delete a tunnel.

Add New Tunnel

Allows you to create a heading for the tunnel settings that you can
select using the Tunnel drop-down menu.

Apply

Activates the selected setting (Enabled or Disabled).

Local Endpoint Settings

The following table describes the fields in the Local endpoint settings section of the
VPN Setup page.

Field Name

Description

Address group type

Allows you to select the address group type for the local VPN access
group. The following types are available:



IP subnet



Single IP address



IP address range

Subnet

Allows you to enter Subnet information based on the selected
Address group type as follows:



For IP subnet, enter the subnet.



For single IP address, enter only the specific IP address.



For IP address range, enter the starting and ending IP addresses.

Summary of Contents for DPC2320 DOCSIS



































































































































Search results

Summary of Contents for DPC2320 DOCSIS

Reviews:

Related manuals for DPC2320 DOCSIS

Brands by name

Popular brands

Cisco DPC2320 DOCSIS, User Manual

Search results

Summary of Contents for DPC2320 DOCSIS

Reviews:

Related manuals for DPC2320 DOCSIS

Brands by name

Popular brands