Chapter 3 Configuring the DOCSIS Residential Gateway
18
4042831 Rev A
Log in to the DOCSIS Residential Gateway for the
First Time
This section provides detailed instructions for logging in to the residential gateway
so that you can use the WebWizard to customize the residential gateway to suit your
needs, rather than using the default (factory) settings.
The residential gateway uses a default IP address of 192.168.0.1. If you have
connected the residential gateway correctly and you have configured your computer
properly, use the following procedure to log in to the residential gateway as an
administrator.
Accessing the Residential Gateway
You must access the WebWizard in order to configure the residential gateway. To
gain access to the WebWizard, use the web browser on the PC attached to the
gateway and complete the following steps.
1
Open the web browser on your PC.
2
Type the following IP address and then select
Go
:
http://192.168.0.1
.
3
The web browser accesses the WebWizard and displays the default
About Your
Modem
page. This page displays information about your cable modem along
with a series of tabs for accessing other WebWizard configuration and operation
features.
