Cisco CPS-MSP-1RU-K9, User Manual

Page: 8 / 70

1-2
Cisco Physical Security Multiservices Platform Series User Guide
OL-21838-03
Chapter 1 Overview
System Interface
Key features include:
• 300 W high-efficiency power supply on 1-RU model, and 900 W high-efficiency power supply with
redundancy option on 2-RU model
•
High-performance fans with built-in redundancy for optimized cooling
• Support for fiber channel card or video encoding card (1-RU only)
•
Hot-swappable SATA hard disk drives (in RAID configurations only)
System Interface
The Multiservices Platform Series device includes a variety of controls and LED indicators that help you
manage and monitor the system. The following sections describe these items in detail:
• Control Panel Buttons and LEDs, page 1-2
•
Hard Drive Indicator LEDs, page 1-3
Control Panel Buttons and LEDs
Table 1-1 describes the controls and LEDs on the front panel of the Multiservices Platform Series device.
Table 1-1 Multiservices Platform Series Device Controls and LEDs
Control Description
Buttons
Reset button Press this button to reboot the Multiservices Platform Series device.
This button is recessed on 2-RU models. Use a pin or paperclip to press it on
these devices.
Power button Press this button to apply or remove power from the Multiservices Platform
Series device.
To perform a normal, graceful shutdown of the device, press and release the
button quickly. To shut down the device immediately, press and hold the button
for 4 seconds.
Turning off system power with this button removes the main power but keeps
standby power supplied to the system.
Warning Because the device receives standby power even when it is turned
off, unplug device from its power source before servicing it.
LEDs
Power Failure LED Flashes to indicate a power failure in the power supply.