E-15
Cisco Physical Security Multiservices Platform Series User Guide
OL-21838-03
Appendix E 16 x D1 and 8 x D1 Video Capture Cards
Configuration Instructions for Cisco Video Surveillance
Step 4
Connect the PTZ analog camera(s):
•
Single Camera Configuration, page E-15
•
Multiple Camera Configuration, page E-16
Single Camera Configuration
If only one PTZ analog camera is used:
a.
Connect a RS-232 cable from the COM (serial) port on the camera to the serial port adapter on the
Multiservices Platform Series, as shown in
.
Note
Connect the wires from the PTZ analog camera according to the camera documentation. The
PTZ controls will not work if the serial cable wires are incorrectly attached.
b.
Connect the BNC video cable between the camera and the BNC breakout panel.
c.
Continue to
.
Figure E-11
Single Analog PTZ Camera: Serial and BNC Cable Connections
1
Analog PTZ camera.
5
16 x D1 and 8 x D1 video capture cards installed
in a Multiservices Platform Series.
2
RS-232 serial cable to provide PTZ
control for a single analog camera.
6
Multi-channel video cable.
3
Serial port on the 1-RU or 2-RU
Multiservices Platform Series.
7
BNC breakout panel.
4
Serial cable adapter used to connect
individual RS-232 wires from the camera.
8
BNC video cable connected between the camera
and the BNC breakout panel.
1
20
279923
RS-232 serial cable
BNC video cable
1
5
7
8
2
3
6
4
