Cisco Catalyst IW6300 Series Hardware Installation Manual Download

Page: 21 / 84

C H A P T E R

Before You Begin

This chapter describes what steps you need to take before beginning the installation of your Access Point.

•

Unpacking the Access Point, on page 13

•

Tools and Hardware, on page 14

•

Warnings, on page 15

•

Safety Information, on page 15

•

Avoiding Damage to Radios in a Testing Environment, on page 17

•

Installation Guidelines, on page 19

Unpacking the Access Point

When you are unpacking the access point, do not remove the foam blocks attached to the antenna connectors.
The foam protects the antenna connectors during installation.

To unpack the access point, follow these steps:

Procedure

Step 1

Open the shipping container and carefully remove the contents.

Step 2

Return all packing materials to the shipping container, and save it.

Step 3

Ensure that all items listed in

Package Contents, on page 13

are included in the shipment. If any item is

damaged or missing, notify your sales representative.

Package Contents

The typical access point package contains the following items:

• Access point

• IW-6300H-AC-x-K9 (AC power model)

• IW-6300H-DC-x–K9 (DC power model)

• IW-6300H-DCW-x-K9 (DC wide range power model)

Cisco Catalyst IW6300 Heavy Duty Series Access Point Hardware Installation Guide

Summary of Contents for Catalyst IW6300 Series





















































































Search results

Summary of Contents for Catalyst IW6300 Series

Reviews:

Related manuals for Catalyst IW6300 Series

Brands by name

Popular brands

Cisco Catalyst IW6300 Series, Hardware Installation Manual

Search results

Summary of Contents for Catalyst IW6300 Series

Reviews:

Related manuals for Catalyst IW6300 Series

Brands by name

Popular brands