2-709
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
switchport mode
This example shows how to configure a port as an 802.1Q tunnel port:
Switch(config-if)#
switchport mode dot1q-tunnel
You can verify your settings by entering the
show interfaces
interface-id
switchport
privileged EXEC
command and examining information in the Administrative Mode and Operational Mode rows.
Related Commands
Command
Description
show dot12q tunnel
Displays information about 802.1Q tunnel ports on the switch.
switchport
Displays the administrative and operational status of a switching
(nonrouting) port, including port blocking and port protection
settings.
Configures a port as a static-access or dynamic-access port.
Configures the trunk characteristics when an interface is in trunking
mode.