2-433
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show auto qos
show auto qos
Use the
show auto qos
user EXEC command
to display the initial configuration that is generated by the
automatic quality of service (auto-QoS) feature.
show auto qos
[
interface
[
interface-id
]]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
In releases earlier than Cisco IOS Release 12.2(25)EY, the
show auto qos
[
interface
[
interface-id
]]
command output shows the initial generated auto-QoS configuration.
In Cisco IOS Release 12.2(25)EY or later, the
show auto qos
command output shows only the auto-QoS
command entered on each interface. The
show auto qos interface
interface-id
command output shows
the auto-QoS command entered on a specific interface.
Use the
show running-config
privileged EXEC command to display the auto-QoS configuration and the
user modifications.
On an enhanced-services (ES) port, the
srr-queue bandwidth shape
interface configuration command
is not part of the generated
auto qos voip
command list.
To display information about the QoS configuration that might be affected by auto-QoS, use one of these
commands:
•
show mls qos
•
show mls qos maps cos-dscp
•
show mls qos interface
[
interface-id
] [
buffers
|
queueing
]
•
show mls qos maps
[
cos-dscp
|
cos-input-q
|
cos-output-q
|
dscp-cos
|
dscp-input-q
|
dscp-output-q
]
•
show mls qos input-queue
•
show running-config
Examples
This is an example of output from the
show auto qos
command after the
auto qos voip cisco-phone
and
the
auto qos voip cisco-softphone
interface configuration commands are entered:
Switch>
show auto qos
GigabitEthernet1/0/1
auto qos voip cisco-softphone
GigabitEthernet1/0/2
interface
[
interface-id
]
(Optional) Display auto-QoS information for the specified port or
for all ports.
Release
Modification
12.1(14)AX
This command was introduced.
