2-237
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
location (global configuration)
location (global configuration)
Use the
location global configuration
command to configure location information for an endpoint. Use
the
no
form of this command to remove the location information.
location
{
admin-tag
string
|
civic-location identifier
id
|
elin-location
string
identifier
id
}
no location
{
admin-tag
string
|
civic-location identifier
id
|
elin-location
string
identifier
id
}
Syntax Description
Defaults
This command has no default setting.
Command Modes
Global configuration
Command History
Usage Guidelines
After entering the
location civic-location
identifier
id
global configuration command, you enter civic
location configuration mode. In this mode, you can enter the civic location and the postal location
information.
The civic-location identifier must not exceed 250 bytes.
Use the
no lldp med-tlv-select location
information interface configuration command to disable the
location TLV. The location TLV is enabled by default. For more information, see the “Configuring LLDP
and LLDP-MED” chapter of the software configuration guide for this release.
admin-tag
Configure administrative tag or site information.
civic-location
Configure civic location information.
elin-location
Configure emergency location information (ELIN).
identifier
id
Specify the ID for the civic location or the elin location. The ID range
is 1 to 4095.
Note
The identifier for the civic location in the LLDP-MED TLV is
limited to 250 bytes or less. To avoid error messages about
available buffer space during switch configuration, be sure that
the total length of all civic-location information specified for
each civic-location identifier does not exceed 250 bytes.
string
Specify the site or location information in alphanumeric format.
Release
Modification
12.2(40)SE
This command was introduced.
