© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 79 of 146
Initialize the HBA Settings
An HBA that has just been shipped from the factory has initialized settings and does not require the steps listed
here. Perform these steps to restore the default adapter settings.
1. Select Set Emulex Adapter to Default Settings and then press the Enter key (Figure 82).
Figure 82.
Selecting Set Emulex Adapter to Default Settings
2. The Set Emulex Adapter to Default Settings screen appears. Select Set Adapter Defaults and then press
the Enter key (Figure 83).
