manualshive.com logo in svg

Cisco C880 M4, Configuration Manual

Enhance your network infrastructure with the advanced Cisco C880 M4. Access its Operating Manual to efficiently set up and configure this versatile product for optimal performance. Download the manual for free at manualshive.com, empowering you to fully maximize the potential of your Cisco C880 M4 without any hassle.

Share
Download
background image

 

 

© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. 

Page 3 of 146 

Post-Installation Configuration .......................................................................................................................... 123

 

Update the OS After the Installation .................................................................................................................. 123

 

Verify the Driver Specification ........................................................................................................................... 123

 

Configure and Tune the OS .............................................................................................................................. 123

 

Bond Linux Ethernet Interfaces ......................................................................................................................... 124

 

VLAN Configuration .......................................................................................................................................... 126

 

SSH Key Distribution ........................................................................................................................................ 126

 

sysctl.conf ......................................................................................................................................................... 126

 

Network Time Protocol Configuration ............................................................................................................... 128

 

SAP HANA Setup (Network File System) ........................................................................................................... 129

 

SAP HANA Setup (SAN) ...................................................................................................................................... 130

 

mkfs.xfs ............................................................................................................................................................. 130

 

/etc/fstab ........................................................................................................................................................... 130

 

/etc/after.local .................................................................................................................................................... 130

 

SAP HANA Installation ........................................................................................................................................ 131

 

SAP Notes ........................................................................................................................................................ 131

 

Linux Notes ....................................................................................................................................................... 131

 

SAP Application Notes ...................................................................................................................................... 132

 

Notes About Third-Party Software .................................................................................................................... 132

 

SAP HANA Virtualization Notes ........................................................................................................................ 132

 

SAP HANA High Availability (Scale-Out Only) .................................................................................................. 133

 

Configure High Availability ................................................................................................................................ 133

 

Enable the SAP HANA Storage Connector API ................................................................................................ 134

 

Test the IPMI Connectivity ................................................................................................................................ 134

 

Autostart SAP HANA ........................................................................................................................................ 135

 

SAP HANA Failover Test (Scale-Out Only) ........................................................................................................ 136

 

SAP HANA Server Network Configuration ........................................................................................................ 138

 

SAP HANA Hardware Configuration Check Tool Preparation ......................................................................... 142

 

OS Validation .................................................................................................................................................... 142

 

Storage Test ..................................................................................................................................................... 142

 

Example (user = <SID>adm) ............................................................................................................................ 145

 

For More Information ........................................................................................................................................... 146

 

Summary of Contents for C880 M4



















































































































































Reviews:

No comments

Related manuals for C880 M4

Tyco Electronics 8 Port 10/100Mbit/s Ethernet Smart Switch with Fibre Uplink Product User Manual preview
8 Port 10/100Mbit/s Ethernet Smart Switch with Fibre Uplink
Brand: Tyco Electronics Pages: 18
TYAN TN76-BP016 Service Manual preview
TN76-BP016
Brand: TYAN Pages: 109
SanDisk Mobile Ultra Memory Stick Micro User Manual preview
Mobile Ultra Memory Stick Micro
Brand: SanDisk Pages: 1
Western Digital My Net N750 Start Here Manual preview
My Net N750
Brand: Western Digital Pages: 8
Qixiang Technology QR310 Installation And Configuration Quick Manual preview
QR310
Brand: Qixiang Technology Pages: 16
Longshine LCS-C844 User Manual preview
LCS-C844
Brand: Longshine Pages: 56
Quantum StorNext QD7000 Manual preview
StorNext QD7000
Brand: Quantum Pages: 29
IBM eServer 130 xSeries User Reference Manual preview
eServer 130 xSeries
Brand: IBM Pages: 156
Vitek VT-IP2MSD102H Brochure preview
VT-IP2MSD102H
Brand: Vitek Pages: 2
DataLocker IronKey EMS H350 Enterprise User Manual preview
IronKey EMS H350 Enterprise
Brand: DataLocker Pages: 23
i3 International SRX-Pro Server Quick Start Manual preview
SRX-Pro Server
Brand: i3 International Pages: 2
i3 International SAN iS316 User Manual preview
SAN iS316
Brand: i3 International Pages: 89
Patton IPLink 2603 Series User Manual preview
IPLink 2603 Series
Brand: Patton Pages: 120
Western Digital MY PASSPORT EDGE User Manual preview
MY PASSPORT EDGE
Brand: Western Digital Pages: 77
Perle IOLAN MDC User Manual preview
IOLAN MDC
Brand: Perle Pages: 491
Supero SUPERSERVER 6035B-8R+ User Manual preview
SUPERSERVER 6035B-8R+
Brand: Supero Pages: 110
Atlantis WebShare 141 WN Quick Start Manual preview
WebShare 141 WN
Brand: Atlantis Pages: 78
Maxtor QUICKVIEW 300 Product Manual preview
QUICKVIEW 300
Brand: Maxtor Pages: 73

Brands by name

Popular brands

Load more brands