© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 78 of 146
Acquire an HBA WWN
Confirm the WWN of the HBA for which setup is currently being performed.
1. Select Display Adapter Info (Figure 81). The WWN of the HBA is displayed as the node name.
Figure 81.
Selecting Display Adapter Info
2. Check the information. The MMB web user interface displays the slot containing the mounted HBA as the
PCI-Express Slots item whose Seg, Bus, and Dev values match the Seg#, Bus#, and Dev# values on the
Emulex Adapter Configuration Main Menu screen.
Note that the I/O Unit (IOU) and PCI_Box screens of the System menu display the PCI-Express Slots items. The
Emulex Fibre Channel EFI-Bios Utility screen uses hexadecimal notation for the displayed values, and the MMB
web user interface uses decimal notation (Table 3).
Table 3.
MMB Web User Interface Display
PCI Express (PCIe) Slots
PCI Slot Number
Power Status
Slot Status
Link Width
Seg/Bus/Dev
PCIe Card Information
Firmware Version
0
Standyby
Not present
1
On
OK
x8
0/13/0
-
-
2
On
OK
x8
0/14/0
-
-
3
Standby
Not present
