© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 75 of 146
Figure 77.
Device Manager Screen
Note the following points when using UEFI Driver Version 6.11a5 or later to set a SAN boot configuration on the
16-Gbps Fibre Channel card. Refer to Display Adapter Info on the Port 001:Emulex LPe16002B-M6-F 16Gb 2-port
PCIe Fiber Chann screen to check the UEFI driver version.
●
Before deleting a registered boot entry with the Delete Boot Device process, be sure to change the BIOS
setting (Set Boot from SAN) to Disable.
●
Running the Delete Boot Device process with Enable as the BIOS setting (Set Boot from SAN) may
sometimes render the Emulex Configuration Utility inoperable. In such a case, in the Power Control window
of the MMB web user interface, select Reset to restart the system. Then reenter the settings for the 16-
Gbps Fibre Channel card.
Display the Device Manager
Display the Device Manager screen.
1. Select Device Manager (Figure 78).
