Configuring MPLS Layer 2 VPNs
Configuring Frame Relay DLCI-to-ATM AAL5SNAP Bridged Interworking
6
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Configuring Frame Relay DLCI-to-ATM AAL5SNAP Bridged
Interworking
To configure the Frame Relay DLCI-to-ATM AAL5SNAP Bridged Interworking feature on an ATM-PE
router, perform the following steps:
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
no ip domain lookup
4.
mpls label range
minimum-value maximum-value
[static
minimum-static-value
maximum-static-value
]
5.
mpls label protocol ldp
6.
mpls ip default-route
7.
mpls ldp graceful-restart
8.
xconnect logging pseudowire status
9.
pseudowire-class [
pw-class-name
]
10.
encapsulation mpls
11.
interworking ethernet
12.
exit
13.
interface loopback
loopback-interface-number
14.
ip address
ip-address mask
15.
exit
16.
interface GigabitEthernet
slot/subslot/port
17.
ip address
ip-address mask
18.
negotiation auto
19.
mpls ip
20.
exit
21.
interface atm
slot/subslot/port
22.
no ip address
23.
atm clock internal
24.
no atm enable-ilmi-trap
25.
exit
26.
interface atm
slot/subslot/port
[
.subinterface-number
{point-to-point}]
27.
mtu
bytes
28.
no atm enable-ilmi-trap
29.
pvc [
name
]
vpi/vci
l2transport
30.
encapsulation
encapsulation-type
