Configuring Cisco License Call Home
Configuration Examples for Cisco License Call Home
6
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
DETAILED STEPS
Configuration Examples for Cisco License Call Home
•
Example: Installing Licenses or Upgrading Software by Using Cisco License Call Home, page 6
•
Example: Rehosting a License by Using Cisco License Call Home, page 7
•
Example: Requesting a License Resend by Using Cisco License Call Home, page 8
Example: Installing Licenses or Upgrading Software by Using Cisco License
Call Home
The following example shows how to use the
license call-home install pak
command to install a license
by using the Cisco License Call Home feature. The command also displays prompts for mandatory
information. The
show license feature
command is used to verify the installation.
Router#
license call-home install pak 3XPXR9E7D30
CCO User name:
User1
CCO password :
************
Pak Number : 3XPXR9E7D30
Pak Fulfillment type: SINGLE
1. SKU Name : Gatekeeper
SKU Type : Product
Description : Gatekeeper
Ordered Qty : 1
Available Qty : 1
Feature List :
Feature name: gatekeeper Count: Uncounted
Platform Supported : N/A
5400
5350
2800
3800
Do you want to install the above listed SKU(s)? [yes/no]:
yes
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
license call-home resend
dest-lic-location
Example:
Router# license call-home resend
flash:licenseresend.lic
Obtains all licenses this device owns and stores them in the
specified location.
Step 3
license install
stored-location-url
(Optional) Installs the revoked license.
•
For details, see the “Installing and Upgrading
Licenses” in the
Configuring the Cisco IOS Software
Activation Feature
module.
