manualshive.com logo in svg

Cisco ASR1002 - ASR 1002 Router, Software Configuration Manual

Share
Download
Cisco ASR1002 - ASR 1002 Router Software Configuration Manual Download Page 16

xvi

Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide

OL-16506-11

Preface

  

Document Revision History

The Document Revision History records technical changes to this document. The table shows the Cisco 
IOS XE software release number and document revision number for the change, the date of the change, 
and a brief summary of the change.

Release No.

Date

Change Summary

IOS XE 3.7.0

July 25, 2012

  •

Added new content to document the Configuring Cisco 
Right-To-Use License in the 

“Configuring Cisco 

Right-To-Use License”

 chapter.

  •

Added new content to the Synchronous Ethernet in the 

“Network Synchronization Support”

 chapter.

  •

Added new content to the Scalability and Performance 
in the 

“Broadband Scalability and Performance”

 

chapter.

  •

Added new content to the bridge domain interface 
configurations in the 

“Configuring Bridge Domain 

Interfaces”

 chapter.

IOS XE 3.6.0

March 30, 2012

  •

Added new content to document the Cisco License Call 
Home in the 

“Configuring Cisco License Call Home”

 

chapter.

IOS XE 3.4.0S

July 25, 2011

  •

Added new content to document the Monitoring and 
Maintaining Multilink Frame Relay feature in the 

“Monitoring and Maintaining Multilink Frame Relay”

 

chapter.

  •

Added new content to document In Service One-Shot 
Software Upgrade Procedure in the 

“Software Upgrade 

Process”

 chapter.

IOS XE 3.3.0S

March 30, 2011

  •

Added new content to document the Scalability and 
Performance in the 

“Broadband Scalability and 

Performance”

 chapter.

  •

Added software upgrade information for ASR 1001 
chassis in the 

“Using SubPackages for Software 

Upgrade on a Cisco ASR 1001 Router”

 section in 

“Software Upgrade Process”

 chapter.

IOS XE 3.2.0S

November 24, 2010

  •

Added new content to document bridge domain 
interface configurations in the 

“Configuring Bridge 

Domain Interfaces”

 chapter.

  •

Added new content to document the Synchronous 
Ethernet in the 

“Network Synchronization Support”

 

chapter.

IOS XE 3.1.0S

July 30, 2010

  •

Added upgrade and file package information in the 

“Software Packaging and Architecture”

 chapter.

  •

Added restriction regarding ISSU support in Cisco IOS 
XE Release 3.1S in 

“Software Upgrade Process”

 

chapter.

Summary of Contents for ASR1002 - ASR 1002 Router















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands