Gy Interface Support
▀ Configuring Gy Interface Support
▄ Cisco ASR 5x00 Packet Data Network Gateway Administration Guide
370
pending-traffic-treatment noquota buffer
pending-traffic-treatment quota-exhausted buffer
exit
exit
context
<context_name>
subscriber default
ip access-group
<acl_name>
in
ip access-group
<acl_name>
out
ip context-name
<context_name>
active-charging rulebase
<rulebase_name>
credit-control-group
<cc_group_name>
end
Notes:
For information on configuring IP access lists, refer to the
Access Control Lists
chapter in the
Systems
Administration Guide
.
For more information on configuring ECS ruledefs, refer to the
ACS Ruledef Configuration Mode Commands
chapter in the
Command Line Interface Reference
.
For more information on configuring ECS charging actions, refer to the
ACS Charging Action Configuration
Mode Commands
chapter in the
Command Line Interface Reference
.
For more information on configuring ECS rulebases, refer to the
ACS Rulebase Configuration Mode Commands
chapter in the
Command Line Interface Reference
.
Configuring PLMN and Time Zone Reporting
PLMN and Time Zone Reporting feature requires a credit-control group to be defined in the APN or subscriber
configuration or there must be a default credit-control group configured. The following CLI commands are available to
enable/disable PLMN and Time Zone Reporting feature:
To enable PLMN and Time Zone Reporting through subscriber-template, use the following configuration:
configure
context
<context_name>
subscriber name
<subscriber_name>
dns primary
<primary_ipaddress>
dns secondary
<secondary_ipaddress>
ip access-group test in
