![background image](http://html.mh-extra.com/html/cisco/asr-5x00-home-enodeb/asr-5x00-home-enodeb_administration-manual_64831176.webp)
PDN Gateway Configuration
▀ Configuring the System as a Standalone PMIP P-GW Supporting an eHRPD Network
▄ Cisco ASR 5x00 Packet Data Network Gateway Administration Guide
176
port ethernet <
slot_number/port_number
>
no shutdown
bind interface <
s6b_interface_name
> <
aaa_context_name
>
exit
port ethernet <
slot_number/port_number
>
no shutdown
bind interface <
gx_interface_name
> <
aaa_context_name
>
exit
port ethernet <
slot_number/port_number
>
no shutdown
bind interface <
gy_interface_name
> <
aaa_context_name
>
exit
port ethernet <
slot_number/port_number
>
no shutdown
bind interface <
rf_interface_name
> <
aaa_context_name
>
end
Notes:
The
p-cscf table
command under
ims-auth-service
can also specify an IPv4 address to the PCRF.
The S6b interface IP address can also be specified as an IPv6 address using the
ipv6 address
command.
The Gx interface IP address can also be specified as an IPv4 address using the
ip address
command.
The Gy interface IP address can also be specified as an IPv4 address using the
ip address
command.
The Rf interface IP address can also be specified as an IPv6 address using the
ipv6 address
command.
Configuring QCI-QoS Mapping
Use the following example to create and map QCI values to enforceable QoS parameters:
configure
qci-qos-mapping <
name
>
qci 1 user-datagram dscp-marking <
hex
>
qci 3 user-datagram dscp-marking <
hex
>
qci 9 user-datagram dscp-marking <
hex
>
exit