Monitoring the Service
▀ Monitoring System Status and Performance
▄ Cisco ASR 5x00 Packet Data Network Gateway Administration Guide
226
Monitoring System Status and Performance
This section contains commands used to monitor the status of tasks, managers, applications and other software
components in the system. Output descriptions for most of the commands are located in the
Counters and Statistics
Reference
.
Table 21.
System Status and Performance Monitoring Commands
To do this:
Enter this command:
View Congestion-Control Information
View Congestion-Control Statistics
show congestion-control statistics {a11mgr |
ipsecmgr}
View GTP Information
View eGTP-C service statistics for a specific service
show egtpc statistics egtpc-service
name
View GTP-U service statistics for all GTP-U data traffic on the
system
show gtpu statistics
View Infrastructure-DNS Queries
Verify Infrastructure-DNS queries to resolve P-CSCF FQDN
dns-client query client-name
client_name
query-type AAAA query-name
<p-cscf.com>
View IP Information
Display BGP Neighbors
Verify BGP neighbors on egress P-GW context
context
egress_pgw_context_name
show ip bgp summary
Verify BGP neighbors on ingress P-GW context
context
ingress_pgw_context_name
show ip bgp summary
Display IP Connectivity State
Verify IP connectivity to the diameter servers for various
components/interfaces; all peers should be in OPEN or
WAIT_DWR state
show diameter peers full all |grep State
Display IP Interface Status
Verify IP interfaces are up on each context
show ip interface summary
show ipv6 interface summary
Display IP Pool Configuration
Verify IPv4 pools have been created and are available
context
egress_pgw_context_name
show ip pool summary
Verify IPv6 pools have been created and are available
context
egress_pgw_context_name
show ipv6 pool summary
View LMA Service Information
