Rf Interface Support
▀ Configuring Rf Interface Support
▄ Cisco ASR 5x00 Packet Data Network Gateway Administration Guide
474
Configuring Rf Interface Support
To configure Rf interface support:
1.
Configure the core network service as described in this Administration Guide.
2.
Enable Active Charging Service (ACS) and create ACS as described in the
Enhanced Charging Services Administration
Guide
.
Important:
The procedures in this section assume that you have installed and configured your chassis
including the ECS installation and configuration as described in the
Enhanced Charging Services
Administration Guide
.
3.
Enable Rf accounting in ACS as described in the
Enabling Rf Interface in Active Charging Service
section.
4.
Configure Rf interface support as described in the relevant sections:
Configuring GGSN P-GW Rf Interface Support
Configuring HSGW Rf Interface Support
Configuring P-CSCFS-CSCF Rf Interface Support
Configuring S-GW Rf Interface Support
5.
Save your configuration to flash memory, an external memory device, and/or a network location using the Exec mode
command
save configuration
. For additional information on how to verify and save configuration files, refer to the
System Administration Guide
and the
Command Line Interface Reference
.
Important:
Commands used in the configuration examples in this section provide base functionality to the extent
that the most common or likely commands and/or keyword options are presented. In many cases, other optional
commands and/or keyword options are available. Refer to the
Command Line Interface Reference
for complete
information regarding all commands.
Enabling Rf Interface in Active Charging Service
To enable the billing record generation and Rf accounting, use the following configuration:
configure
active-charging service
<service_name>
rulebase
<rulebase_name>
billing-records rf
active-charging rf { rating-group-override | service-id-override }
end
Notes:
