PDN Gateway Configuration
▀ Configuring the System as a Standalone eGTP P-GW
▄ Cisco ASR 5x00 Packet Data Network Gateway Administration Guide
112
Required
Information
Description
End point name
An identification string from 1 to 63 characters (alpha and/or numeric) by which the Rf Diameter endpoint
configuration is recognized by the system.
Origin realm
name
An identification string between 1 through 127 characters.
The realm is the Diameter identity. The originator’s realm is present in all Diameter messages and is typically
the company or service name.
Origin host name
An identification string from 1 to 255 characters (alpha and/or numeric) by which the Rf origin host is
recognized by the system.
Origin host
address
The IP address of the Rf interface.
Peer name
The Rf endpoint name described above.
Peer realm name
The Rf origin realm name described above.
Peer address and
port number
The IP address and port number of the OFCS.
Route-entry peer
The Rf endpoint name described above.
How This Configuration Works
The following figure and supporting text describe how this configuration with a single source and destination context is
used by the system to process a subscriber call originating from the GTP LTE network.
