![background image](http://html.mh-extra.com/html/cisco/asr-5x00-home-enodeb/asr-5x00-home-enodeb_administration-manual_64831146.webp)
PDN Gateway Configuration
▀ Configuring the System as a Standalone PMIP P-GW in an LTE-SAE Network
▄ Cisco ASR 5x00 Packet Data Network Gateway Administration Guide
146
configure
context <
pgw_context_name
> -noconfirm
interface <
s5s8_interface_name
> tunnel
ipv6 address <
ipv6_address
>
tunnel-mode ipv6ip
source interface <
name
>
destination address <
ipv6 address
>
exit
exit
policy accounting <
rf_policy_name
> -noconfirm
accounting-level {
level_type
}
accounting-event-trigger interim-timeout action stop-start
operator-string <
string
>
exit
subscriber default
exit
exit
port ethernet <
slot_number
/
port_number
>
no shutdown
bind interface <
s5s8
_
interface_name
> <
pgw_context_name
>
end
Notes:
The S5/S8 (P-GW to S-GW) interface must be an IPv6 address.
Set the accounting policy for the Rf (off-line charging) interface. The accounting level types are: flow, PDN,
PDN-QCI, QCI, and subscriber. Refer to the
Accounting Profile Configuration Mode Commands
chapter in the
Command Line Interface Reference
for more information on this command.
Creating and Configuring APNs in the P-GW Context
Use the following configuration to create an APN:
configure
context <
pgw_context_name
> -noconfirm