Cisco 7905 Phone Manual Download Page 31 | Manualshive

Page: 31 / 46

background image

Customizing Phone Settings

Cisco IP Phone 7905G and 7912G for Cisco CallManager

25

Customizing Phone Settings

You can personalize your Cisco IP Phone by adjusting settings, as described in the tables below.

Note

•

Most settings are accessible on your phone, but a few are accessed online from your
User Options web pages. See the “Accessing Your User Options Web Pages” section on
page 28 for more information.

•

If you want to restore your previously-saved settings on the phone, choose

Settings > more

> Restore.

•

If you want to restore these settings back to those originally stored on the phone when it
was manufactured, choose

Settings > more > Factory.

All your previously saved changes

will be reset.

Adjusting the Volume

The table below describes how to adjust and save volume levels on your phone.

Tip

If you adjust the handset or speaker volume without saving the change, the volume will revert
to the previously saved level the next time you use that audio mode.

If you want to...

Then...

Adjust the volume
level for a call

Press the volume button during a call or after invoking a dial tone.

Doing so adjusts the volume level for the currently active audio mode. For
example, if you increase the volume while you are using the handset, you
have not affected the speaker volume.

Press

Save

to preserve the new volume as the default level for this audio

mode. If you want your phone to keep this volume setting even after a reboot,
press the

Menu

button and choose

Settings

> Save

.

Adjust the volume
level for the ringer

Press the volume button while the handset is in the cradle. The new ringer
volume is saved automatically.

«
...
29
30
31
32
33
...
»

Summary of Contents for 7905















































Reviews:

No comments

Related manuals for 7905

Brand: Nec Casio Pages: 390

Brand: Samsung Pages: 170

Brand: Hanlong Pages: 68

DigiWalker A701

Brand: Mio Pages: 168

Brand: Konrow Pages: 17

Brand: Mobistel Pages: 24

Brand: Flyingvoice Pages: 51

Brand: OUKITEL Pages: 39

Brand: Alcatel Pages: 2

Brand: Pantech Pages: 60

Brand: Xiaomi Pages: 6

Brand: Zte Pages: 46

Brand: Zte Pages: 24

Brand: Xiaomi Pages: 2

8120 - Pearl - GSM

Brand: Blackberry Pages: 33

Brand: KATA Pages: 45

Brand: GENERAL MOBILE Pages: 158

Brand: Huawei Pages: 103

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands