1-3
Cisco Video Surveillance 6500PD IP Camera Installation Guide
Chapter 1 Overview
IP Camera Physical Details
Back View
Figure 1-2
and the table that follows describe the back view of the IP camera.
Figure 1-2
Back View of IP Camera
1
Power cord socket
Connection to an optional PoE power injector if your router or
switch does not support PoE
2
BNC video out
Connects to an optional video monitor that has a BNC
connector
3
Microphone switch
Switches the microphone operation between to following
options:
•
Internal (up)—switches to the built-in internal microphone
on the IP camera.
•
External (down)—switches to the external Microphone In
connector.
4
Video output switch
Switches the video output between to following standards:
•
NTSC 60Hz (up)—switches camera operation to the
National Television System Committee (NTSC) standard.
•
PAL 50Hz (down)—switches camera operation to the
Phase Alternating Line (PAL) standard.
5
General Purpose I/O (GPIO)
terminal block
GPIO terminal block that is used to connect external input and
output devices. For more information, see
Figure 1-3
.
