1-4
Cisco Video Surveillance 6500PD IP Camera Installation Guide
Chapter 1 Overview
IP Camera Physical Details
General Purpose I/O Terminal Block
Figure 1-3
shows the pin locations and descriptions.
Figure 1-3
GPIO Terminal Block Pin Locations and Descriptions
6
SD/SDHC card slot
The IP camera is compliant with Micro SD/SDHC (up to 32GB)
and other preceding standard SD cards.
7
Focus assist button
Used in conjunction with an analog display to fine tune the IP
camera focus.
8
P-iris lens connector
Connection for the cable from a P-iris lens. For more
information, see
Figure 1-4
.
9
Audio out
Audio output port for the IP camera.
10
Power LED
Indicates whether the IP camera is receiving power.
11
Recessed reset button
Recessed button that reboots the IP camera or resets it to a
default state. You can use a pin or paper clip to depress it.
Depending on how long you depress the recessed reset button,
you can do either of the following:
•
Reset—Press and release the recessed reset button. Wait for
the IP Camera to reboot.
•
Restore—Press and hold the recessed reset button until the
status LED rapidly blinks. All settings will be restored to
factory default. Upon successful restoration, the status
LED will blink green and red during normal operation.
12
Audio in
Audio input port for the IP camera.
13
Network status LED
Indicates network activity.
14
Ethernet 10/100 RJ45 socket
Accepts a standard LAN cable to connect the IP camera to a
10/100BaseT router or switch.
Pin
Description
1
Power +12V
2
Digital Output
3
Digital Input
4
Ground
5
AC 24V Input
6
AC 24V Input
7
RS-485+
8
RS-485–
8
7
6
5
4
3
2
1
