5-1
Cisco Unified SIP Phone 3911 Administration Guide for Cisco Unified Communications Manager
OL-14029-01
C H A P T E R
5
Configuring Features and Users
After you install Cisco Unified IP Phones in your network, configure their
network settings, and add them to Cisco Unified Communications Manager, you
must then use the Cisco Unified Communications Manager Administration
application to configure some telephony features, and assign users.
This chapter provides an overview of these configuration and set up procedures.
Cisco Unified Communications Manager documentation provides detailed
instructions for these procedures.
You configure most telephony features on the phone itself. For additional
information, refer to
Cisco Unified SIP Phone 3911 User Guide
.
This chapter includes following topics:
•
Telephony Features Available for the Cisco Unified IP Phone, page 5-1
•
Adding Users to Cisco Unified Communications Manager, page 5-5
Telephony Features Available for the Cisco Unified
IP Phone
After you add Cisco Unified IP Phones to Cisco Unified Communications
Manager, you can add functionality to the phones.
Table 5-1
includes a list of
supported telephony features, many of which you can configure using Cisco
Unified Communications Manager Administration. The Reference column lists
Cisco Unified Communications Manager and other documentation that contains
configuration procedures and related information.
Summary of Contents for 3911
Page 4: ......
