Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
1-10
Cisco Unified SIP Phone 3911 Administration Guide for Cisco Unified Communications Manager
OL-14029-01
Overview of Configuring and Installing Cisco
Unified IP Phones
When deploying a new IP telephony system, system administrators and network
administrators must complete several initial configuration tasks to prepare the
network for IP telephony service. For information and a checklist for setting up
and configuring a complete Cisco Unified IP telephony network, refer to the
“System Configuration Overview” chapter in
Cisco Unified Communications
Manager System Guide
.
After you have set up the IP telephony system and configured system-wide
features in Cisco Unified Communications Manager, you can add IP phones to the
system.
The following topics provide an overview of procedures for adding
Cisco Unified IP Phones to your network:
•
Configuring Cisco Unified IP Phones in Cisco Unified Communications
Manager, page 1-10
•
Installing Cisco Unified IP Phones, page 1-14
Configuring Cisco Unified IP Phones in Cisco Unified
Communications Manager
To add phones to the Cisco Unified Communications Manager database, you can
use:
•
Auto-registration
•
Cisco Unified Communications Manager Administration
•
Cisco Unified Communications Manager Bulk Administration (BAT)
•
BAT and the Tool for Auto-Registered Phones Support (TAPS)
For more information about these choices, see the
“Adding Phones to the Cisco
Unified Communications Manager Database” section on page 2-9
.
Summary of Contents for 3911
Page 4: ......
