1-15
Cisco Unified SIP Phone 3911 Administration Guide for Cisco Unified Communications Manager
OL-14029-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
3.
Monitor the phone startup process.
Verifies that phone is config-
ured properly.
See the
“Verifying the
Phone Startup Process”
section on page 3-10
.
4.
Configure these network settings on
the phone by pressing the OK button.
Choose
Settings
>
Network
Configuration
.
To enable DHCP:
•
Set DHCP Enabled to
Yes
•
Enter the Cisco Unified
Communications Manager
IP
address
for TFTP Server 1 (optional)
To disable DHCP:
•
Set DHCP Enabled to
No
•
Enter the static IP address for phone
•
Enter the subnet mask
•
Enter the IP address for the default
router
•
Enter the IP addresses for DNS
Server 1 and DNS Server 2.
•
Enter the domain name where the
phone resides
•
Enter the Cisco Unified
Communications Manager IP address
for TFTP Server
Using DHCP—The IP address
is automatically assigned and
the Cisco Unified IP Phone is
directed to a TFTP Server.
Note
Consult with the
network administrator
if you need to assign
an alternative TFTP
server instead of using
the TFTP server
assigned by DHCP.
Without DHCP—You must
configure the IP address,
TFTP server, subnet mask,
domain name, and default
router locally on the phone.
See the
“Configuring
Startup Network Settings”
section on page 3-11
.
See the
“Configuration
Menus on the Cisco
Unified IP Phone” section
on page 4-3
.
Table 1-3
Checklist for Installing the Cisco Unified SIP Phone 3911 (continued)
Task
Purpose
For More Information
Summary of Contents for 3911
Page 4: ......
