Cisco 3911 Administration Manual Download

Page: 61 / 106

4-5

Cisco Unified SIP Phone 3911 Administration Guide for Cisco Unified Communications Manager

OL-14029-01

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Configuration Menus on the Cisco Unified IP Phone

Default Router 1

Default router used by the phone
(Default Router 1).

DNS Server 1

DNS Server 2

Primary Domain Name System (DNS)
server (DNS Server 1) and secondary
DNS server (DNS Server 2) used by the
phone.

Operational
VLAN ID

Auxiliary Virtual Local Area Network
(VLAN) configured on a Cisco Catalyst
switch in which the phone is a member.

If the phone has not received an
auxiliary VLAN, this parameter
indicates the Administrative VLAN.

If neither the auxiliary VLAN nor the
Administrative VLAN are configured,
this parameter is blank.

The phone obtains its Operational VLAN
ID via Cisco Discovery Protocol (CDP)
from the switch to which the phone is
attached. To assign a VLAN ID manually,
use the Admin VLAN

Admin. VLAN
ID

Auxiliary VLAN in which the phone is
a member.

Used only if the phone does not receive
an auxiliary VLAN from the switch,
ignored otherwise.

Overrides the value specified by the
Operational VLAN ID option.

Press the

button to choose whether

you wish to enter an auxiliary VLAN.

Table 4-1

Network Configuration Menu Options (continued)

Option

Description

Usage Notes

Summary of Contents for 3911











































































































Search results

Summary of Contents for 3911

Reviews:

Related manuals for 3911

Brands by name

Popular brands

Cisco 3911, Administration Manual

Search results

Summary of Contents for 3911

Reviews:

Related manuals for 3911

Brands by name

Popular brands