3-9
Cisco Unified SIP Phone 3911 Administration Guide for Cisco Unified Communications Manager
OL-14029-01
Chapter 3 Setting Up the Cisco Unified IP Phone
Installing the Cisco Unified IP Phone
Related Topics
•
Mounting the Phone to the Wall, page 3-9
•
Verifying the Phone Startup Process, page 3-10
•
Configuring Startup Network Settings, page 3-11
Mounting the Phone to the Wall
You can mount the Cisco Unified IP Phone on the wall by using special brackets
available in a Cisco Unified IP Phone wall mount kit. (Wall mount kits must be
ordered separately from the phone.) If you attach the Cisco Unified IP Phone to a
wall using the standard footstand and not the wall mount kit, you need to supply
the following tools and parts:
•
Screwdriver
•
Screws to secure the Cisco Unified IP phone to the wall
Before You Begin
To ensure that the handset attaches securely to a wall-mounted phone, remove the
handset wall hook from the handset rest, rotate the hook 180 degrees, and reinsert
the hook. Turning the hook exposes a lip on which the handset catches when the
phone is vertical. For an illustrated procedure, refer to
Installing the Wall Mount
Kit for the Cisco Unified IP Phone
.
Caution
Use care not to damage wires or pipes located inside the wall when securing
screws to wall studs.
Procedure
Step 1
Remove the footstand from the phone.
Step 2
Modify the handset rest so that the handset remains on the ear-piece rest when the
phone is vertically placed.
a.
Remove the handset from the ear-piece rest.
b.
Locate the tab (handset wall hook) at the base of the ear-piece rest.
c.
Slide this tab out, rotate it 180 degrees (left to right), and reinsert it.
Summary of Contents for 3911
Page 4: ......
