C H A P T E R
3-1
Cisco 3310 Mobility Services Engine Getting Started Guide
OL-17304-02
3
Hardware Installation
This chapter includes procedures for installing and removing the rack handles of the mobility services
engine system.
Note
The mobility services engine does not contain user serviceable internal components.
This chapter contains the following sections:
•
•
Installing and Removing the Rack Handles, page 3-2
Before You Begin
Before you begin the installation, read the Regulatory Safety and Compliance Information for the Cisco
3310 Mobility Services Engine document that shipped with your device.
This section contains the following topics:
•
Tools and Supplies Needed, page 3-1
•
Warning
Read the installation instructions before connecting the system to the power source.
Statement 1004
Tools and Supplies Needed
•
Phillips* (cross head) screwdriver, #1 bit and #2 bit
•
Antistatic wrist strap and conductive foam pad
System References
All references to left, right, front, top, and bottom assume the reader is facing the front of the mobility
services engine system as it would be positioned for normal operation.
