4-2
Cisco 3310 Mobility Services Engine Getting Started Guide
OL-17304-02
Chapter 4 Rack Mounting
Unpacking the Mobility Services Engine
Unpacking the Mobility Services Engine
Follow these steps to unpack the mobility services engine.
Step 1
Open the shipping container and carefully remove the contents.
Step 2
Return all packing materials to the shipping container and save it.
Step 3
Ensure that all items listed in the
section are included in the shipment.
Step 4
Examine each item for damage. If any item is damaged or missing, notify your authorized Cisco sales
representative.
Package Contents
Each mobility services engine package contains the following items:
•
One Cisco 3310 Mobility Services Engine
•
AC power cord
•
DB-9 serial cable for console connection with an RJ-45 to DB-9 adapter
•
This guide, the Cisco 3310 Mobility Services Engine Getting Started Guide
•
Four-post installation kit (optional)
Note
A two-post installation kit is not offered for this product.
Installation Precautions
Before you begin the installation, review the warnings and cautions in this section.
Caution
There are no user-serviceable parts inside the power supply; contact Cisco when servicing is required.
Caution
The operating temperature of the mobility services engine, when installed in an equipment rack, must
not go below 50°F (10°C) or rise above 95°F (30°C). Extreme fluctuations in temperature can cause a
variety of problems in your mobility services engine.
Caution
The equipment rack must provide sufficient airflow to the front of the mobility services engine to
maintain proper cooling.
