DNS Client Commands
OL-32830-01 Command Line Interface Reference Guide
358
15
To return to the default behavior, use the no form of this command.
Syntax
ip domain timeout
seconds
no ip domain timeout
Parameters
seconds
—Time, in seconds, to wait for a response to a DNS query. The range is
from 1 to 60.
Default Configuration
The default value is 2 seconds.
Command Mode
Global Configuration mode
User Guidelines
Use the command to change the default time out value. Use the no form of this
command to return to the default time out value.
Example
The following example shows how to configure the switch to wait 50 seconds for a
response to a DNS query:
switchxxxxxx(config)#
ip domain timeout 50
15.7 ip host
Use the ip host Global Configuration mode command to define the static host
name-to-address mapping in the DNS host name cache.
Use the no form of this command to remove the static host name-to-address
mapping.
Syntax
ip host
hostname
address1
[
address2...address8
]
Summary of Contents for 300 Series
Page 2: ......
