37
OL-32830-01 Command Line Interface Reference Guide
736
Port Channel Commands
1
37.1
channel-group
To associate a port with a port-channel, use the channel-group Interface (Ethernet)
Configuration mode command. To remove a port from a port-channel, use the no
form of this command.
Syntax
channel-group
port-channel
mode
{on | auto}
no channel-group
Parameters
•
port-channel—Specifies the port channel number for the current port to
join.
•
mode—Specifies the mode of joining the port channel. The possible values
are:
-
on—Forces the port to join a channel without an LACP operation.
-
auto—Forces the port to join a channel as a result of an LACP operation.
Default Configuration
The port is not assigned to a port-channel.
Command Mode
Interface (Ethernet) Configuration mode
Default mode is on.
Summary of Contents for 300 Series
Page 2: ......
