Spanning-Tree Commands
OL-32830-01 Command Line Interface Reference Guide
910
46
switchxxxxxx(config)#
spanning-tree mst configuration
switchxxxxxx(config-mst) #
revision
1
46.26 show (MST)
Use the show MST Configuration mode command to display the current or
pending MST region configuration.
Syntax
show
{current | pending}
Parameters
•
current—Displays the current MST region configuration.
•
pending—Displays the pending MST region configuration.
Default Configuration
N/A
Command Mode
MST Configuration mode
Example
The following example displays a pending MST region configuration
switchxxxxxx(config-mst)#
show pending
Gathering information ..........
Current MST configuration
Name: Region1
Revision: 1
Instance VLANs Mapped State
-------- ------------------------ -----
0 1-4094 Disabled
switchxxxxxx(config-mst)#
Summary of Contents for 300 Series
Page 2: ......
