DHCP Server Commands
OL-32830-01 Command Line Interface Reference Guide
288
12
Default Configuration
DHCP hosts are not configured.
Command Mode
Global Configuration mode
User Guidelines
During execution of this command, the configuration mode changes to the DHCP
Pool Configuration mode. In this mode, the administrator can configure host
parameters, such as the IP subnet number and default router list.
Example
The following example configures station as the DHCP address pool:
switchxxxxxx(config)#
ip dhcp pool host station
switchxxxxxx(config-dhcp)#
12.11 ip dhcp pool network
To configure a DHCP address pool on a DHCP Server and enter DHCP Pool
Network Configuration mode, use the ip dhcp pool network command in Global
Configuration mode. To remove the address pool, use the no form of this
command.
Syntax
ip dhcp pool network
name
no ip dhcp pool network
name
Parameters
•
name
—Specifies the DHCP address pool name. It can be either a symbolic
string (such as ‘engineering’) or an integer (such as 8). (Length: 1–32
characters).
Default Configuration
DHCP address pools are not configured.
Summary of Contents for 300 Series
Page 2: ......
