Configuration and Image File Commands
OL-32830-01 Command Line Interface Reference Guide
268
10
Example
The following example displays the active system image file that was loaded by
the device at startup and the system image file that will be loaded after rebooting
the switch:
switchxxxxxx#
show bootvar
Image Filename Version Date Status
----- --------- --------- --------------------- -----------
1 image-1 1.1.0.73 19-Jun-2011 18:10:49 Not active*
2 image-2 1.1.0.73 19-Jun-2011 18:10:49 Active
"*" designates that the image was selected for the next boot
10.11 service mirror-configuration
Use the service mirror-configuration Global Configuration mode command to
enable the mirror-configuration service. Use no service mirror-configuration
command to disable the service.
Syntax
service mirror-configuration
no service mirror-configuration
Parameters
This command has no arguments or keywords.
Default Configuration
The default configuration is mirror-configuration service enabled.
Command Mode
Global Configuration mode
Summary of Contents for 300 Series
Page 2: ......